Boards
The hook board editor, in admin mode. Everything is saved on the station at each change.
- The board: name, rows and columns, labels, 1 or 2 transponders per hook for the whole board.
- The automatic fill: the range “1-40”, row by row; a double hook takes two codes.
- “Undo (Ctrl+Z)” and “Redo (Ctrl+Y)”; below, the report of the last action.
- The chosen double hook (blue frame) and its chosen half (yellow frame).
- A drag and drop in progress: the half being carried is faded; the target place, circled in blue (⇄), will be swapped. Towards an empty place the outline is green (↓): moved.
- The chosen hook: 1 or 2 transponders, usual code, identifier, colour.
The board
Name, number of rows and columns, Apply size (up to 40 × 40; the remaining hooks keep their transponder), row and column labels (“A, B, C… / 1, 2, 3…”, your own list, or none). A place is named “B3”. New board and Delete manage several boards.
A hook
Tap a cell to choose it. Untick A hook at this place for a hole. Enter the transponder by hand (its usual code, if needed its number or printed code), or Choose from the FINISH transponders…; choose its colour (palette, or the whole row). A filled hook that FINISH does not know shows a “?”.
1 or 2 transponders per hook
1 transponder (1 foot) / 2 transponders (2 feet) for the chosen hook or the selection; 1 per hook / 2 per hook (2 feet) for the whole board. A double hook is drawn as two half-cells; tapping a half-cell chooses it. Going back to single drops the second transponder, after a question.
Automatic filling
A range or list of usual codes (“1-40”, “001-040”, “P1-P12”, “1_BLANC-8_BLANC”, or a pasted list), placed row by row or column by column, skipping holes, from the first hook or the chosen hook. A double hook takes two codes, unless both transponders share the same usual code in FINISH: that code then fills the pair. A code unknown to FINISH is kept and flagged.
Drag and drop, undo
Drag a cell to an empty place to move it there, to a filled place to swap the two; the handle at the top carries the whole hook. The target is circled in green (move) or blue (swap); Esc cancels. Undo (Ctrl+Z) and Redo (Ctrl+Y) undo and redo each gesture, up to 100 steps.
Export, import
Export all boards…, Export this board… and Import…: see Preparing a second station.